1 Large semicircular crest

Closes the roof to the top at the intersection of two waters, acting as a shield against seepage.

2 Small semicircular crest

Alternative for the large crest, closes the roof to the top at the intersection of two waters, acting as a shield against seepage.

3 Wall border

It is used at waters intersection with fire walls, dividing walls. Prevents water to seep on the wall.

4 Eaves

Mounted under the cover at the junction of two waters and directs water to the rainwater system.

5 Fixing plates to the wall

It is used at the intersection of one water with a wall and prevents water to seep on the wall.

6 Crest cap

Sealing role and at the same time prevents birds from coming in.

7 Woodscrew

Fastens the metal sheet plates and accessories on the wood lath.

8 Bitumen tape

Flexible self adhesive waterproofing tape, recommended for insulation and anti- moisture protection.

9 Universal sealing tape

Used on the eaves and under the crest. Sealing tole.

10 Crest closure

Sealing role and at the same time prevents birds from coming in.

11 Gable border

Closes the sides of the roof covering the roof structure edges. It is assembled over the fascia board, after tile plates were fixed.

12 Gable border under the tile

Closes the sides of the roof and is assembled over the fascia board, before fixing the tile plates.

13 Rain shadow border

Connects to the drainage system allowing water to drain from the cover to the trough.

14 Snow stopper

Is assembled on the cover and prevents snow slides off the roof.

15 Omega snow stoppers

It is an alternative to conventional snow stoppers.

16 Slope breaking

It is used in areas where roof pitch changes the slope.

17 Synthetic Roofing Underlayment

RhinoRoof U20 is a highly-engineered, mechanically-attached, coated woven synthetic roofing underlayment for sloped roofs.

18 Roof Cap

Easy to install and for use with 3 in. or 4 in. round ducts. Constructed of durable, resilient steel with black enamel finish.

19 Master Flashing

The Oatey SCS Master Flash 8 in. Roof Flashing offers a customized fit to accommodate a broad range of pipe diameters from 1/4 in. to 4 in. for ease of installation.